84414466 5WK96711B 5WK96711C Nox sensor

84414466 5WK96711C Nitrogen Oxide nox sensor

5WK96711C nox sensor is factory fitted on many different tractors and other agriculture machinery with adBlue SCR system.

Continental part numbers 5WK96711A  5WK96711B and 5WK96711C are compatible with each other.

84414466 Nitrogen Oxide control sensor is direct replacement to old faulty genuine continental or Case IH New Holland JCB brand part.

If you have did on-board computer scan and your machine is showing diagnostic trouble fault codes DTC related to nox sensor, it means that's NOX sensor has failed and needs to be replaced as soon as possible.

NOX stands for Nitrogen Oxides.

Error cleaning may be required, but just once after fitting new NOX sensor, it can be done by yourself, no need to visit dealer.

Replacement sensor will save you a fortune and you will comply with enviromental laws again.

5WK96711C oem part number supersedes other oem numbers, which could be found below.

The most common Case IH warning message:

• SCR Failure

Case IH diagnostic trouble codes DTC fault codes

• 3521 NOx Estimation failure - Estimated Nox signal not reliable
• 3528 NOx Sensor Plausibility failure - Signal not plausible
• 3529 NOx Sensor Failure - Open Load
• 3530 NOx Sensor Failure - Short Circuit
• 3532 NOx Sensor Failure - Sensor not ready in time
• 3533 CAN Message timeout Nox (from Nox Sensor) -CAN timeout
• 3561 NOx value not plausible (After treatment plausibility)
• 19784 Group error path NOx exceeded _Error belonging to group NOx exceeded active _P2000 Nox Trap Efficiency Below Threshold
• 1A4 Timeout Can Nox sensor
• 1A3 NOx sensor heater error
• 4AA Adblue Quality Warning level 1
• 3623 NOx sensor deviation signal (NOx sensor removal determined)
• 19784 Channel of the group error of excess NOx - the error belongs to the group of active errors of exceeding the level of NOx - the performance of the NOx trap is below the threshold value P2000
• 3639 Checking the offset of the NOx sensor

Part numbers:

• 84414466

Continental part number:

• 5WK96711C

More compatible part numbers:

• 5WK96711A
• 5WK96711B
• 84292579

Compatibility machines

• Case IH Puma 160 CVT tractors
• Claas
• JCB
• Massey Ferguson
• New Holland T7 Farm tractors
• New Holland T6.160 AC
• Inna
• CASE IH MAXXUM 120 - 125 - 135 - 115 - 110 - 130 - 140 - 145 - 150
• CASE IH PUMA 185 - 145 - 170 - 200 - 215 - 230 - 160 - 130
• STEYR 6215 CVT 6185 CVT 6145 PROFI 6205 CVT 4115 PROFI
• Steyr 4145 PROFI 6230 CVT 4125 PROFI 4135 PROFI 6170 CVT
• Puma Maxxum T7 T6
• NEW HOLLAND T6.120 T6.150 T6.160 T7.185 T7.210 T6.145 T6.165
• NEW HOLLAND T6.175 LM 6.32 LM 6.35 LM 7.42 T6.125 T6.140 T7.200 FR 450 T7.270 T7.235
• NEW HOLLAND T7.170 T7.260 T7.220 T7.250 LM 7.35 T6.155 T6.180 FR 500 LM 9.35
• 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019
• New Holland Newholland T7-200 T7.200
• 2013
• New Holland T7250 T7.250
• 4x4 FWD MFWD 4WD
• AC Tier 4A Blue Power
• 2011 2012 2013

Please note: This list is not full, NOX sensor may fit other models as well, please check provided part numbers, pictures and compare to your old parts.