Loading...

A0009058611 A3C01067900-610 Nox sensor

£169.99
In stock

Fast Delivery

Secure Checkout

  • What's Included: 1 NOX Sensor
  • Condition: New
  • Warranty: 1 Year
  • Manufacturer: Xenons4U
  • Mercedes Benz part number: A0009058611
  • Continental part number: A3C01067900-610
  • Vitesco Technologies part numbers: SNS610A AAA9174070000

A0009058611 A3C01067900-610 Nox sensor

A0009058611 Nitrogen Oxide control sensor is direct replacement to faulty genuine mercedes benz or continental brand part.

If you have did on-board computer scan and your car is showing this error code P229F62 or P2202, it means that's NOX sensor has failed.

NOX stands for Nitrogen Oxides.

Error cleaning may be required, but just once after fitting new NOX sensor, it can be done by yourself, no need to visit dealer.

Continental A3C01067900-610 Emission control unit sensor fits many different mercedes-benz cars GLC X253 Hatchback C253 Coupe ML GLE GLS X166 SUV Vito Viano and many other.

Replacement sensor will save you a fortune and you will comply with enviromental laws again.

Mercedes benz oem part number A0009058611 supersedes other oem numbers, which could be found below.

The most common warning messages for Mercedes-Benz sprinter

  • AdBlue malfunction em. op. in x mi km see owner's man.
  • AdBlue system malfunction See Owner's Man.
  • AdBlue system malfunction Emergency modie in x mls km
  • Cannot measure fluid level AdBlue
  • Eng. Start not possible in x mi km

The most common diagnostic trouble fault codes

  • P22A1-22 P22A122 NOx sensor 2 (cylinder bank1) has a short circuit to positive. The signal amplitude is greater than the maximum amplitude.
  • P229F-23 P229F23 NOx sensor 2(cylinder bank1) has a malfunction. No signal change: voltage level is too low.
  • P220013 The NOx sensor 1 (cylinder bank1) has an electrical fault. There is an open circuit
  • P220013 An electrical fault exists in the NOx sensor (cylinder bank 1). An open circuit exists
  • P220013 The NOx sensor (cylinder bank 1) has an electrical fault. There is an open circuit
  • P220011 The NOx sensor 1 (cylinder bank 1) has an electrical fault. There is a short circuit to ground
  • P220011 An electrical fault exists in the NOx sensor (cylinder bank 1). There is a short circuit to ground
  • P220011 The NOx sensor (cylinder bank 1) has an electrical fault. There is a short circuit to ground
  • P220108 The NOx sensor (cylinder bank 1) has a malfunction. There is a signal fault or the message is faulty.
  • P221408 The NOx sensor (cylinder bank 2) has a malfunction. There is a signal fault or the message is faulty.
  • P221401 Nox sensor cylinder bank 2 malfunction.
  • P2201-62 NOx sensor (cylinder bank 1) has a malfunction. The signal comparison is faulty.
  • P2202 - NOx Sensor Circuit Low Bank 1
  • P229FE1 P229F(E1) Nitrogen oxides (NOx) sensor 2, bank 1 - circuit range/performance
  • P220A0(16) Nitrogen oxides (NOx) sensor 2, bank 1 - circuit low
  • P229E(11) Nitrogen oxides (NOx) sensor 2, bank 1 - circuit malfunction
  • P22A677 - The heater of NOx sensor 2 (cylinder bank 1) has an electrical fault. The commanded position cannot be reached.
  • P2BA901 - The emission limit for the NOx concentration has been exceeded (Adblue quality is too low). There is a general electrical fault.
  • P13DF09 - The Adblue system has a malfunction. There is a component fault.
  • P13E400 The remaining driving distance is limited due to a malfunction in the AdBlue system
  • P2BA9FD The emission limit for the NOx concentration has been exceeded (AdBlue quality is too low)
  • P1BC300 Additional fault freeze frame data for fault analysis (data set 03)
  • P22A0 - Nitrogen Oxides NOx sensor 2 Circuit Low Voltage Bank 2
  • P22A021 - NOx sensor 2 (cylinder bank 1) has a short circuit to ground. The signal amplitude is less than the minimum amplitude
  • P229F - Nitrogen Oxides (NOx) sensor 2, bank 1 - circuit range/performance
  • P13D-F09 The AdBlue system has a malfunction. There is a component fault.
  • P229F-62 NOx sensor 2 (cylinder bank 1) has a malfunction. The Signal Comparison is faulty
  • P229F-09 NOx sensor 2 (cylinder bank 1) has a malfunction. There is component fault.
  • P220400 the nox sensor (cylinder bank 1) has a sporadic malfunction._
  • P220000 the nox sensor (cylinder bank1) has an electrical fault._
  • P220162 - The NOx sensor (cylinder bank 1) has a malfunction. The signal comparison is faulty.
  • P204F96 - The AdBlue system (cylinder bank 1) has a malfunction. There is an internal component fault.
  • P140300 - The control unit AdBlue has a malfunction.
  • P220E77 - The heater of NOx sensor 1 (cylinder bank 1) has a malfunction. The commanded position cannot be reached.
  • P229f09 - Nox sensor 2 cylinder bank 1 has a malfunction there is a component fault
  • P229f28 - Nox sensor 2 cylinder bank 1 has malfunction
  • P229F62 P229F-62 Signal of NOx sensor implausible
  • P229F62 NOx sensor 2 (cylinder bank 1) is faulty. The signal comparison
    is faulty
  • P229F-92 P229F92 NOx sensor 2 (cylinder bank 1) has a malfunction. The function or the instruction is faulty
  • P220F-77 P220F77 NOx sensor heater Control Circuit Range / Performance Bank 1 Sensor 2. The commanded position cannot be reached
  • P2201-ED P2201ED The NOx sensor (cylinder bank 1) has a malfunction
  • P20EEFD The efficiency of the SCR catalytic converter (cylinder bank 1) is not sufficient
  • P22FD84 Changeover too slow between the maximum and minimum value of the NOx sensor 2 (Bank 1) - Signal too low
  • P2201FD The NOx sensor 1 (cylinder bank 1) has a malfunction
  • P220192 The NOx sensor 1 (cylinder bank 1) has a malfunction. The function or the instruction is faulty
  • P2201 Nox sensor circuit range/performance sensor 1 bank 1
  • P229F Capteur NOx circuit gamme performance banc 1 capteur 2
  • P2201E3 The NOx sensor (Cylinder bank 1) has a malfunction
  • U029E87 Communication with NOx sensor 2 has a malfunction. The message is missing

Mercedes-Benz part numbers:

  • A000 905 86 11
  • A0009058611
  • MA0009058611/80
  • A0009058611/80
  • MA000905861180
  • MA0009058611

Continental part number:

  • A3C01067900-610
  • A3C01067900610

Vitesco Technologies part numbers

  • SNS610A
  • AAA9174070000

More compatible part numbers:

  • A0009052909 A2C16442800-292
  • A0009050208 A2C13684500-287
  • A0009059803 5WK96683E
  • A2C12548400-083G
  • A2C12548400083G

Mercedes Benz compatibility list:

  • A class W176 A200 CDI
  • B class W246
  • B180 B200 B220 CDI
  • CLA C117 Coupe CLA200 CDI
  • GLA X156
  • GLA200d CDI diesel AMG Line 
  • GLE W166 SUV
  • GLE300d GLE350d 3.0L V6 diesel BlueTEC
  • 2016 2017
  • GLE C292 Coupe
  • GLE350d 2018 2017 2018
  • GLS X166 GLS350d 3.0L V6 diesel 4MATIC BlueTEC
  • 2017
  • GLC C253 Coupe 2015 2016 2017 2018 2019 2020
  • GLC X253 Hatchback
  • GLC220d GLC250d diesel BlueTEC 4MATIC
  • S class W222 S300d S350d BlueTEC 2015 2016 2017
  • G class W463 2017 2018 2019 2020 2021
  • G350d G400d diesel 463.348
  • Sprinter W906 Van Bus
  • Vito W447 Van Bus 2014 2015 2016 2017 2018
  • 1.6 V200 V220 V250
  • 109 111 114116 CDI 119 BlueTec

Please note: This list is not full, NOX sensor may fit other car models as well, please check provided part numbers, pictures and compare to your old parts.

Payment Providers© 2024 Xenons4U