H8 H9 H11 50W LED Canbus Resistors
- What's Included: 2 Resistors
- Condition: New
- Part numbers: H8, H9, H11
- Compatible with 3 part numbers
- Used for: Foglights
- Used with: LED bulbs only, not compatible for LED kit!
- Fix bulb out error message warning
- Warranty: 1 Year
Out of stock
Incl. VAT:
£2.99
H8 H9 H11 50W LED Canbus Resistors
A pair of H8, H9, H11 50W LED canbus resistors to cancell on-board computer errors
These canbus resistors are compatible with 3 different socket bulbs H11, H8 and H9, it will fit and work with any of these.
These resistors are specially designed to have plug and play connectors, to avoid any cutting or damaging car's wires.
If you are receiving an error message on the dashboard you will need a pair of these and it will immediately shut down this message.
Error issues are common when you have replaced halogen bulbs for less power using LED bulbs. These resistors are only for LED bulbs, not for LED conversion kits.
LED Resistors get, please make sure they are installed properly.
The most common vw volkswagen warning messages
Check front left fog light!
Check front right fog light!
Specifications & Features
- Fix OBC Error (Bulb out warning error message) on the dashboard
- Socket: H11, H8, H9
- 50 Watts, 6Ohm
- Direct Replacement, Plug and Play
- Used for: Foglights
Customer Reviews
3
Canbus resistor for Mk6 Golf foglights
Review by
Brian F.
The plug that connects to the wiring loom on my Mk6 Golf did not fit, so I had to cut and remove part of it in order to facilitate a connection. This meant that I then had to tie the two plug parts (i.e. the male & female connectors) together with a zip tie to prevent it coming apart, then tape up with insulating tape. The plug that connects to the bulb was fine. Apart from that, the resistor works fine and my foglights work perfectly with no more dash warnings.
5
Items as described
Review by
Nicholson M.
Posted quickly
Write Your Own Review