If a Ford Puma's daytime running light (DRL) stops working, flickers or turns yellow, check the LED module, the lamp assembly and the electrical connections before choosing a repair. The symptom alone does not show which component has failed.

A faulty LED module can be replaced. However, a new module will not repair a damaged light guide, a cracked housing or a wiring fault. Diagnosis should establish whether the problem is electrical, inside the lamp, or both.

What should you check first?

Park safely and compare both front lamps in the same lighting. Note whether the problem affects the left side, the right side or both, and whether the light is discoloured, dim, intermittent or completely dark. Check the DRLs and indicators separately.

SymptomWhat to investigate
Yellow or uneven colourThe LED light source and the light guide in the assembly
DRL completely darkElectrical supply, connectors, LED module, internal lamp components
Flickering or intermittentConnections, and the conditions when it happens
DRL and indicator both affectedThe shared module and its circuits, not two unrelated failures
Visible damage or water inside the lampHousing, seals and electrical components

If an indicator or any lighting you need for visibility is unreliable, arrange repair promptly and avoid driving where it is needed.

Why can a Ford Puma DRL turn yellow?

A DRL that was white and is now yellow or dim needs inspection of two things: the light source and the light guide that spreads its light.

Discolouration or damage in the light guide changes how the illuminated strip looks, and deterioration of the LED source can also be a factor. Colour alone cannot confirm that the module is working or that the light guide is damaged. The right repair depends on whether the fault is in the replaceable LED module, elsewhere in the assembly, or both.

Also rule out an aftermarket module that was deliberately fitted to produce a different colour.

What can cause a DRL to stop working?

A dark DRL can come from the electrical supply, wiring, connectors, the LED module or the lamp assembly. Useful checks include:

  • Diagnostic fault codes for the affected lighting functions.
  • Fuses and supplies listed in vehicle-specific information. A fuse that keeps blowing points to an underlying fault, so do not just keep replacing it.
  • Connector condition, wiring damage and corrosion.
  • Cracks or water ingress inside the lamp.
  • Operation of the LED module and associated components.

If the fault appeared after a previous repair, recheck that component and its connections before ordering another part.

Does the LED module also operate the indicator?

Yes. The L1TB-13D278-AA and L1TB-13D278-BA specifications cover both daytime running light and turn-signal functions. If both are affected, investigate the module and its connections first. That still does not prove the module is defective.

Avoid swapping in the opposite-side module as a test. Left and right modules have different references and should not be assumed interchangeable.

When should the LED module be replaced?

Replace it when testing identifies the module as the defective part and you have confirmed the replacement fits your headlamp. Before ordering, check the rest of the assembly: a new module will not restore a damaged light guide or fix a cracked housing, and any source of water ingress needs attention too. If the fault is in the assembly rather than the module, a different repair is needed.

Identifying L1TB-AA and L1TB-BA replacements

Match the original markings and headlamp application before ordering. Use left and right references rather than "driver's side" or "passenger's side", which differ between markets.

Fitting sideFoMoCo referenceValeo referencesFord reference
LeftL1TB-13D278-AAB134410-C / 901824872384045
RightL1TB-13D278-BAB134411-C / 901824892384047

For a confirmed matching application:

These replacement modules are manufactured by Xenons4U. The Valeo and FoMoCo numbers are the original component references they replace.

Check the module label against the headlamp assembly reference and your vehicle details. Model year or trim alone is not enough to confirm compatibility, especially if the headlamp has been replaced before.

Other listed Puma DRL applications

Some Puma headlamps use the H1BB-13D278-AC LED DRL module, identified by 208479-00, ST5872H, L90156368 and Ford 2119178. This is not interchangeable with L1TB-13D278-AA or -BA, so confirm the original module and headlamp first.

Can a faulty or yellow DRL affect the MOT?

For applicable passenger vehicles first used on or after 1 March 2018, the GB MOT inspection includes original-equipment DRLs, and the manual specifies that DRLs must emit white light. See the official MOT inspection requirements. A dark or wrongly coloured DRL should be investigated rather than ignored; the outcome depends on the lamp's condition and the inspection criteria.

Check warranty before buying parts

If your Ford is under warranty, ask a Ford dealer whether the diagnosed fault is covered before buying a replacement. Do not assume cover or goodwill based on another owner's experience.